What was said above about mixing board output levels varying is correct.
I believe they are selling an XLR-mini cable that will do exactly what you need without the need for more. They are a professional broadcast supply house and can give you what you need to connect literally anythng to literally anything. I sub mix a matrix through the Dante cards. On a Yamaha M7CL I use two Dante cards that have gigabit outputs that plug into a Mac Pro's two gigabit ports and 32 channels come up in the DAW. I use a Presonus FireStudio as my interface. I use a four channel matrix (drums, band, choir, soloist) and two direct outs for wireless mics. If the audio mixer has a matrix, you can set up a sub mix on the matrix, send that to your interface. If the audio mixer has a usb or firewire out, then you might be able to go straight to the DAW. The interface will more than likely have a USB or Firewire to connect to your laptop/DAW. If the mixer you want to record from has direct outputs on each channel, you can put those into your interface. The interface between the mixer and your DAW has to have enough input/outputs. It would help if you knew what kind of mixer you were hooking up to. In the past when using tape to record there could be issues as tape stretches, but now, no biggie with disc recording. On a PC I use Sony Vegas and I've never had a problem there either. Just pick the audio and the video clips and click sync. I use Final Cut Pro X now to sync and it's built in.
0 kommentar(er)
